Software Info

AQUAGAUGE
All Aquagauge^TM AG-RFLCD models can be linked directly to a PC with the supplied cable. Our AQUACHART PC software can then be used to collect, save and display data. The software is supplied on CD and enables continuous digital chart recording of water level and temperature. The charted data can be rescaled during collection and the sample interval may be varied between a few seconds and several hours. The PC operating system must be Windows 95/98/2000/ME/XP.
Our AG-RFLOG water level data logging system requires AQUALOGGER software for serial port setup, data download and data display. Sampling interval may be varied from a few seconds to several hours, with an initial delay ranging from zero seconds to several months. Up to 32k samples can be saved and the inbuilt RF data transmitter can be enabled or disabled at setup time. The software is supplied on CD and the PC operating system must be Windows 95/98/2000/ME/XP. A description of the main features of the software can be downloaded here. A copy of the software is available here
Aquagauge^TM AG-RFLCD models purchased with the optional PDA-SERIAL package can be linked to a PDA, with PALM OS 4.1 or lower, equipped with a serial port and cable. Our AQUAGAUGE PDA software can then be used to collect, save and display data. The software allows continuous chart recording of water level and temperature. Data may be saved to the PDA Memo Pad in short blocks. The saved data can be exported to a PC by HotSync and data can be rescaled and replotted on the PDA.

	The screenshots above represent a few examples of some data obtained using this system. A description of the main features of the software can be downloaded here.
M2M-MANAGER
M2M-MANAGER software enables a user to define a 3 character access password and a phone number for return SMS messages from M2M-GSM systems. This program is an extremely simple piece of software to use and requires only a PC running Windows 95/98/2000/ME/XP. A serial cable is provided to connect the hardware unit to an available PC COM port. Once the system has been initialised using this program the mobile phone can be connected to the hardware module with the phone serial data cable. SG-ELECTRODE
SGE-MULTI systems have a Palm OS PDA as the central controling unit. The software enables the operator to select any combination of the 16 SG-ELECTRODE sensors to be monitored. In addition the software provides for variation of the interval between sampling and allows scaling of the data plotting parameters. Other functions include averaging of data and the rejection of spurious values. Data may also be saved to the PDA Memo Pad in short blocks. The saved data can be exported to a PC by HotSync and data can be rescaled and replotted on the PDA at the end of measurements. The screenshots on the right represent a few examples of data obtained using the SGE-MULTI system in some sulfuric acid/water mixtures. Measurements were made with a sensor powered by 3 AA cells.


CB-MONITOR CB-Monitor software allows for central PC supervision of up to 4 outstations, each with 3 analog inputs, 2 digital inputs and 1 digital output. Provision is made for scaling and calibration of analog sensors. Outstations can be automatically polled at user defined intervals from every 5 minutes to 12 hrs. Data can be saved to a text file for later retrieval. High or low alarm values can be set and adjusted to enable a warning signal to be sent over the one CB radio channel. Graphical visualisation of all data is available and can be rescaled and replotted in real time.