CB-Monitor

High speed long range system consisting of a central PC-controlled base station with up to to 4 outstations, each with 3 analog inputs, 2 digital inputs and 1 digital output.  Provision is made for scaling and calibration of analog sensors. Outstations can be automatically polled at user defined intervals from every 5 minutes to 12 hrs.  Data can be saved to a text file for later retrieval.  High or low alarm values can be  set and adjusted to enable a warning signal to be sent over a CB radio channel.  

  • Graphical visualisation of all data is available and can be rescaled and replotted in real time. 

  • Communication between base station and outstations is by spread spectrum frequency hopping signals at 900MHz using 1 W radio modems. 

  • Data can be transmitted at 9600bps (long range) or 115,200 bps             (reduced range). 

  • Transmission of digital images in near real time is possible.

  • Indoor or urban range with a standard 3dB antenna is around 1km and outdoor range (line of sight) with same antenna is about 20 km. 

  • Using high gain directional antennas the range can be extended up to 60 km.

  • The central base station is equipped with a mains powered 1.5W CB radio which transmits a warning signal when an alarm condition has been reached.

  • All outstations can be powered by 6 Volt solar panels with sealed lead-acid battery backup.  

The screenshots below illustrate the main control page and graphical display for one station

 

 

 

 

[Top of page]
Date this page was last edited: 31-Jul-2008
© Electrosense Technologies